Ericsson compatible 1.25G, SFP, 1310nm, 10KM Transceiver, LC Connector for SMF with DOM

These Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector. The module data link up to 10KM in 9/125um single mode fibre.   The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.FEATURES Up to 1.25Gb/s data links FP laser transmitter and PIN photo-detector Up to 10km on 9/125µm SMF Hot-pluggable SFP footprint Duplex LC/UPC type pluggable optical interface Low power dissipation Metal enclosure, for lower EMI RoHS compliant and lead-free Support Digital Diagnostic Monitoring interface Single +3.3V power supply Compliant with SFF-8472 Case operating temperature Commercial: 0°C to +70°C Industrial: -40°C to +85°C APPLICATIONS Switch to Switch Interface Gigabit Ethernet Switched Backplane Applications Router/Server Interface Other Optical Links WARRANTY3-years limited warrantyTAA-approved SFPs available upon request, Contact us for more details.

Speed: 1.25 Gbps Wavelength: 1310nm Range: 10km over 9/125µm single-mode fibre (SMF) Connector Type: Duplex LC/UPC Form Factor: Small Form Factor Pluggable (SFP) Power Supply: Single +3.3V Power Dissipation: <1W typically Temperature Range (Commercial): 0°C to +70°C Digital Diagnostic Monitoring: Yes (SFF-8472 compliant) Transceiver Components: LD driver, limiting amplifier, digital diagnostic monitor, FP laser, PIN photo-detector Features: Hot-pluggable, Tx Disable, I2C control, Tx Fault indication, Loss of Signal (LOS) output Standards: MSA (Multi-Sourcing Agreement) compliant, RoHS compliant, lead-free Warranty: 3-year limited warranty